http://WWW.GIREESHCOOLINGTOWER.COM
GIREESHHEATEXCHANGERS 5b76d130705d360507cf7eb0 False 103 21
OK
background image not found
Found results for
'air conditioner'
Humidification Plant INR   0 INR  0
view details
-NaN%

Humidification Plant

With our state-of-the-art technology, Gireesh Humidification Plant manufacturer a wide range of Humidification Plant. Our range of Humidification Plants caters to the needs of textile industries and helps to manufacture yarns of various garments. We offer these plants in customized specifications as per the demands of our valued clients. Our humidification of indoor air for thermal comfort. In a broader sense, the term can refer to any form of cooling and heating, ventilation, or disinfection that modifies the condition of air. An air conditioner (often referred to as AC or air con.) is an appliance system, or machine designed to stabilise the air temperature and humidity within an area to use for cooling as well as heating depending on the air properties at a given time, typically using a refrigeration cycle but sometimes using evaporation

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Air Oil Cooler Manufacturer INR   0 INR  0
view details
-NaN%

Air Oil Cooler Manufacturer

AIR OIL COOLER IN OVERVIEW : – Gireesh are among the major Air Oil Cooler manufacturers and suppliers based in India. Our Air Oil cooler is used at the places where the required temperature of the oil is above ambient. Air Oil Cooler offered by us is equipped with a Fin & Tube type heat exchanger and an Axial Fan. Generally Oil from the bleed line of the power pack is passed through the copper tube inner space and ambient air with the help of the axial fan is blown over these pipes effecting heat transfer. So generally the lowest possible temperature 0 is ambient dry bulb plus 10 C for the given capacity flow. Our Air Oil Cooler is also equipped. These are D Cup Coolers (also known as Bar and Fin Cooler), or Plate and Fin type coolers, typically because cooling fins are attached to the heat sink, thereby increasing its surface areatogreatercoolingeffectiveness. 1.Oilflowhandlingupto100LPM 2. Cooling capacity up to 57000 Kcal/h AIR OIL COOLER FEATURES : – To maintain the oil sump temperature, where it is not very precise. Units are equipped with a fin & tube heat exchanger & axial fan. Air is passed over the exchanger external surface area and oil flows inside the tube from the bleed line of the power pack. The temperature of the oil depends upon the ambient temperature. AIR OIL COOLER ADVANTAGES OF AIR COOLING : – Reduced running costs against water No danger of cross-contamination No secondary coolers required (cooling tower) Very low maintenance and installation cost High lifespan DESIGN FEATURES  : – Cooler core easily removable for cleaning of fins Impeller/motor arrangement are housed and protected inside a ducting Cooler core all steel welded construction and hot dip galvanised Very high fatigue strength and pressure resistance Metallic bond between tubes and fins assures excellent heat transfer and rigidity of fins High quality standards AIR OIL COOLER MAINTENANCE AND SPARES : –  Machine tool machinery manufacturers Plastic machinery / Product Manufactures Laser cutting machinery manufacturers Sand reclamation equipments in Foundries EDM Wire cutting machine manufacturer

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Air Cooled Condenser INR   0 INR  0
view details
-NaN%

Air Cooled Condenser

Air Cooled Condenser Overview:– The gireesh is a well known manufacturer of a high quality range of Air Cooling Condenser which are high on demand in the market and they can be got customized by the clients as per their requirements. These products are made using advanced technology and they offer a high performance to the customers.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Air Cooler INR   0 INR  0
view details
-NaN%

Air Cooler

 Air Cooler Overview:– Gireesh are among the major Air Oil Cooler manufacturers and suppliers based in India. OurAir Oil cooler is used at the places where the required temperature of the oil is above ambient. Air Oil Cooler offered by us is equipped with a Fin & Tube type heat exchanger and an Axial Fan. Generally Oil from the bleed line of the power pack is passed through the copper tube inner space and ambient air with the help of the axial fan is blown over these pipes effecting heat transfer. So generally the lowest possible temperature 0 is ambient dry bulb plus 10 C for the given capacity flow. Our Air Oil Cooler is also equipped. Features Of Air Cooler : – To maintain the oil sump temperature, where it is not very precise. Units are equipped with a fin & tube heat exchanger & axial fan. Air is passed over the exchanger external surface area and oil flows inside the tube from the bleed line of the power pack. The temperature of the oil depends upon the ambient temperature. Advantages of air-cooling: Reduced running costs against water No danger of cross-contamination No secondary coolers required (cooling tower) Very low maintenance and installation cost High lifespan Design features: Cooler core easily removable for cleaning of fins Impeller/motor arrangement are housed and protected inside a ducting Cooler core all steel welded construction and hot dip galvanised Very high fatigue strength and pressure resistance Metallic bond between tubes and fins assures excellent heat transfer and rigidity of fins High quality standards Maintenance And Features Of Air Cooler : – Machine tool machinery manufacturers Plastic machinery / Product Manufactures Laser cutting machinery manufacturers Sand reclamation equipments in Foundries EDM Wire cutting machine manufacturers Advantages of using air coolers : – Air is always available. Maintenance cost normally less than for water cooled systems. In event of power failure they can transfer some heat because of natural convection. Mechanical design is normally simpler due to pressure on air side always being closer to atmospheric. Fouling on air side can normally be ignored. No problem arising from thermal & chemical pollution of cooling fluids. Disadvantages of air coolers : – Noise – Low noise fans are reducing this problem but at cost of fan efficiency & hence higher energy costs. May need special features for cold weather protection (high pour point liquids freezes in cold weather). Can not cool to same low temperature as cooling tower.  

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Air Blast Coolers INR   0 INR  0
view details
-NaN%

Air Blast Coolers

AIR BLAST COOLERS OVERVIEW : – Gireesh Air/Oil heat exchangers have been made to be used in the return line of the hydraulic systems. The cooler element is made from alum-alloy, which is a highly conductive material. The braise welding process of the, gives a high thermic exchange and a good pressure rating. Mineral oils, hl, hlp, water-oil emulsion.We recommend that a bypass valve is installed in parallel to the heat exchanger, to protect it during the starting. Make sure there is no obstruction to the air flow. FEATURES OF AIR BLAST COOLERS : – These are continuous flat fin and tube heat exchangers having compact and sleek design. Ideal for oil cooling applications where there is a scarcity of water and fir economy of operation. Provided with axial flow fan and motor of requisite capacity together supplied as a completely packaged unit. Standard sizes available from capacities ranging from 500 kcal / hr to 10,000 kcal / hr. Higher sizes and custom built units can be offered as per customer”s requirements. Designs with copper tubes / Aluminium fins and Copper tubes / Copper fins available. Available for working pressures up to 15 bar and working temperatures up to 150° C. AIR BLAST COOLERS MAINTENANCE : – Oil side cleaning: The oil side of the cooler can be cleaned by flushing with a detergent or a degreasing products compatible with aluminium. To remove the residuals silt, please use compressed air. Air side cleaning: The air side of the cooer can be cleaned using compressed air or water. Please pay attention to the jet direction for not spoiling the vanes. If the cooler is contaminated with oil or grease, you can steam clean the cooler. Make sure the electric motor is disconnected and properly protected.   AIR BLAST COOLERS CAPACITIES : – The cooling capacity of the heat exchangers is based on the outlet water temperature being above the ambient temperature. The rated cooling capacity will apply when there is a temperature differential between the inlet and the outlet of e.g., in those conditions water would return to the cooling unit at above ambient. The heat extraction rate will vary according to the differential between the inlet and ambient temperatures. The greater this differential, the great the heat extraction rate at the cooler.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Finned Tube Heat Exchangers Manufacturers INR   0 INR  0
view details
-NaN%

Finned Tube Heat Exchangers Manufacturers

Finned Tube Heat Exchangers for applications that require high heat transfer area for relatively low heat transfer fluids. The advantages of using these finned tube heat exchangers are that they are compact. Our integrally finned tube heat exchangers can be used in refrigeration condensers as well as for oil cooling applications. The typical applications are for air heating, cooling. The fins are either plate fins or helically wound depending upon the quality of air and the temperature. The capacities range from 1000 kcal/hr to 1,000,000 kcal/hr. We cater finned tube heat exchangers which are designed as per the international standards and requirements of the clients. These exchangers can be employed for cooling or heating of air or other gases which flow in a duct or cooling of water and other liquids using air. Also, these units are provided with persistent flat-fin and tubes, tubes with annular drawn fins, tubes with continuous spirally wound plain or corrugated fins or tubes with washer type fins.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Evaporative Cooling Towers INR   0 INR  0
view details
-NaN%

Evaporative Cooling Towers

EVAPORATIVE COOLING TOWERS OVERVIEW: Evaporative cooling towers of the Gireesh series are designed to allow maximum flexibility of deployment. The vertical air discharge, in fact, makes the operation of the same wholly independent of the direction and intensity of the prevailing winds. In case of installation of the towers within industrial premises, there is a version with higher centrifugal ventilators, which allows the channelling of the delivery or return air. The Gireesh cooling towers enjoy the best protection against atmospheric agents being wholly made of thick galvanised sheet metal, which is further protected by an appropriate paint. All electric motors and the supporting ventilators are waterproofed and of special execution, thereby ready for outdoor installation. By request towers can be supplied complete with damper control capacity – the version with centrifugal fans – installed on the lip of every fan. They can also be supplied complete with an electric pump for the circulation of cooling water and with an electrical control panel to control resistance to winter icing. EVAPORATIVE COOLING TOWERS QUALITY CONTROL: Gireesh evaporate cooling towers essentially combines a cooling tower and a condenser coil in single equipment. It eliminates the sensible heat transfer step of the condenser coil water which is required in the cooling tower/condenser system. This permits a condensing temperature substantially closer to design wet-bulb temperature, and consequently, minimum heat process energy input. ADVANTAGES OF ACE AND SPARES: Since the process fluid of a closed loop system is completely isolated from the environment, routine maintenance is only required on the heat rejection equipment itself. The need to shut down the system periodically to clean the heat exchanger is dramatically reduced, if not entirely eliminated. Providing clean process fluid to the system will extend the life of other components in the system (condenser bundles, compressors, etc.).

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
Cross flow cooling towers INR   0 INR  0
view details
-NaN%

Cross flow cooling towers

CROSS FLOW COOLING TOWERS OVERVIEW: Gireesh Cross Flow Cooling Towers are designed & manufactured to deliver utmost space and energy efficiency. There is no need of maintenance for the rotary sprinklers or tiny nozzles. One can easily clean the distribution basin and nozzles even when the tower is operating thus, saving pump power. The fan, motor and water distribution system is easily maintained. TECHNICAL SPECIFICATION OF CROSS FLOW COOLING TOWERS: The tower draws the air through the side and the upwards moving hot water gets collected in the FRP basin fitted on the top and the air passes through the target nozzles and sprinkles over the PVC fills. ADVANTAGES OF CROSS FLOW COOLING TOWERS: Aluminium die casting m/c Air compressors A/C plant & chilling plants Plastic Injection moulding m/c and Blow moulding m/c Chemical industries Dairy, and food processing industries Distilleries and Breweries plants Genets & Megawatt Projects Glass Mfg. Plant Herbal, Aromatics & extraction plants Industries heat process Oil refineries PVC pipes mfg.plant Soap / Cosmetic mfg. industries Steel factory and foundry. FEATURES OF CROSS FLOW COOLING TOWERS: To net propelling demands of our clients, we are engaged in offering a wide range of Cross Flow Cooling Tower. This cooling tower is designed for maximum service life and durable structure for long working period. It’s PVC perforated “v” bar provides maximum wet surface and long air water contact to give maximum performance in all seasons. This product is widely demanded in domestic as well as international market. Long life Less maintenance Withstand all adverse conditions MAINTENANCE AND SPARES FOR CROSS FLOW COOLING TOWERS: 1. Excellent Design and Long lifetime: The shell of cooling tower adopts high quality and toughness glass fibre, beautiful shape, resistant to natural factors and chemical material erosion, looks brand new even after long time use. All the steel shelves are processed by immersive hot galvanized zinc and reducing the oxidation mostly, prolong the service life. 2. High Efficiency and Energy Saving: Gireesh series cooling tower using excellent quality PVC film as thermal interface material, corrosion resistant, no deformation, curved and diagonal design film effectively prolongs exchange time between high temperature water and air inside cooling tower, which makes air flow smoothly and resistance lower, meanwhile, making the water drift ratio lowest, furthermore, the axial and arc fan, specially designed basin with evenly distributed water stoma, which highly improved heat exchange rate of cooling tower and lower the entire cooling tower”s energy consumption and noise. 3. Easy Installation, Reasonable and Practical Usage: Gireesh series cooling towers can be paralleled for multi-units, flexible combination, widely used. The body structure is tidy, standardized, and compact and strong, which is easy for installation. The design and manufacture are all on basis of practical uses, so it can meet customers” requirement better with high quality.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
RCC Cooling Towers INR   0 INR  0
view details
-NaN%

RCC Cooling Towers

Gireesh offers a wide range of concrete rcc cooling towers designed for any application. The RCC Cooling towers Structure of the cooling towers can either be built by us or by the clients own contractors. A permanent structure, low maintenance cooling tower can be built at a surprising low premium over a timber tower. Salient Features of RCC Cooling Towers: Both counter-flow and cross-flow patterns are available to suit customer needs. Splash and Film fills in various materials of construction are available. The concrete structure is optimized by in house structural engineers to minimize civil costs. In house detail engineering ensures quick release of construction drawings and simplified construction methodology. Civil construction can be carried out by our own experienced, construction group. RCC – Structure Frame work is done normally in M30 grade of RCC as per IS standards. Types of RCC Cooling Towers: RCC Cooling Tower with Multi cell RCC Cross Flow Cooling Tower RCC Tower with Fill RCC Counter Flow Cooling Tower RCC Tower with V Bar. SALIENT FEATURES OF RCC COOLING TOWERS: RCC Induced Draft Counter-flow Cooling Tower: In a counter-flow cooling tower the air moves vertically upwards through the fill while waterfalls vertically downwards. Film type fill is used and is suitable for all cooling load applications, however, it is more suitable for the application where cold water temperature is critical and water quality is good. These cooling towers are made of RCC construction. Film type fill is made of PVC for normal water applications. These cooling towers are fitted with the fills of wider flute so that it can withstand most of the industrial water. The film type fill should be avoided for the applications where water has traces of oil and contaminated water. In the case of contaminated water PVC “V” bars and grid can be used. Cooling towers are fitted with high efficiency mechanicals such as axial flow fans, gear boxes and drive shafts. RCC Induced Draft Cross-flow Cooling Towers: In a cross-flow cooling tower air moves through the fill horizontally and water falls vertically. The fill used is splash type fill and is suitable for cooling all load applications; however, it is more suitable for the application where water has higher suspended solids which can be a problem for film fill cooling tower operation. These cooling towers are made of RCC. For high temperature applications the splash fill is made of chemically treated timber whereas for normal temperature applications it is made of PVC. It can be of rectangular or “V” bar shape. The fill is supported on a SS-304 grid. Cooling towers are fitted with high efficiency mechanical parts such as axial flow fans, gear boxes and drive shafts. RCC COOLING TOWERS MAINTENENACE AND SPARES: 1. RCC structure is designed to give maximum efficiency while retaining structural stability. 2. The distribution system is with the latest design of nozzles to ensure a proper distribution of water. 3. The fill media is of Virgin PVC fills, with double edge folding at the edges. These results in a very long life of fill media. 4. Choice of aerodynamic PVC – “S” type or “C” type Drift Eliminators. 5. Aerodynamic FRP fan to save recurring power cost. 6. Long lasting – FRP Fan Casing. 7. Easy to clean and maintain. 8. Highly reduced cost of maintenance

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false